NO HOT WATER? Follow These EASY Tips
NO HOT WATER? Follow These EASY Tips
Blog Article
How do you really feel in relation to What Would Cause My Electric Water Heater to Stop Working??
Numerous modern houses make use of an electric hot water heater for their heating unit, as a result of its convenience and also simplicity of use. Nonetheless, just like any other electric appliances, troubles may develop with its usage, all of a sudden. It can be really discouraging to wake up to a chilly shower rather than a hot one or having your bath with water that isn't warm enough or perhaps too warm. Whatever the instance may be, hot water heater problems can be rather aggravating. Thankfully, we've made a checklist of feasible services to your water heater concerns. There are a variety of factors that might trigger most of these problems, it could be a concern with the power supply, the electric heating element, or the thermostat. Before doing anything, ensure you shut off the major power supply for safety. Whatever the problem is, getting it repaired ought to not present way too much of a problem if you comply with these actions:
Examine Your Power Supply:
As standard as this might seem, it is very required. Without sufficient power, your hot water heater will certainly not operate. So the first thing to do when your water instantly retires is to confirm that it isn't a power problem. Check if the fuse is blown out or the circuit breaker tripped. If the circuit breaker is the problem, just transform it on and off once again. Change any type of busted or damaged fuse. Examine the device with power after these modifications to see if it's currently functioning.
Examine the Burner in the Water Heater:
If it's not a power problem, then try taking a look at your burner if it is still functioning. Examine each of your burner to be sure the problem isn't with any of them. If any of them is defective, replace that part and after that inspect whether the hot water is back on.
Inspect Your Thermostat:
If your hot water heater still isn't functioning or the water coming out isn't hot enough, you may need to check the temperature settings on your upper thermostat. Guarantee the circuit breaker is switched off before doing anything. Open the access panel and press the red button for temperature reset above the thermostat. This should help heat the water. Turn the breaker back on and also examine if the trouble has actually been solved.
Call An Expert:
If after replacing all defective parts and resetting your temperature, the water heater still isn't functioning, you might require to call a professional plumber for an expert viewpoint. The problem with your heater could be that the cold and hot faucets have actually been changed or it may be undersized for the amount of warm water required in your house. Whatever the situation may be, a professional plumber would certainly assist resolve the problem.
Final thought
Water heater problems are not constantly significant. A number of them are because of minor concerns like a blown fuse or damaged heating element. Replacing the damaged components ought to do the trick. Nevertheless, if you are still not able to solve the trouble, give a call to your nearby plumber to find to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
We hope you enjoyed our piece on How to Troubleshoot and Repair an Electric Water Heater. Thank you for spending some time to read our blog. Liked our post? Please share it. Help other people locate it. Thanks for your time. Visit again soon.
Quote
Report this page